610 Semi Automatic Pre-set Case Taper
/in Sealer Tape Semi Automatic Pre-Set 110, 150, 200 400, 500, 600, 800, inf 100, 120, 150, 200 300, 400, 500 50, 100, 110 150, 400, 460, 500 10, 12, 14, 18, 20, 22, 25/by CBJamie

610 SEMI AUTOMATIC PRE-SET CASE TAPER The Endoline type 610 case sealer is a semi automatic pre-set machine that seals cases with self-adhesive tape top and bottom. It is well-suited to single operator control, sealing consistent size cases for long production runs of the same case size. The type 610 case sealer machine is very simple to operate and maintain with a very quick changeover for each case size. CASE DIMENSIONS The type 610 can handle cases between 120-990mm length, 100-500mm width and 110-500mm height. TAPE SIZE 50mm MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Compact Footprint
With a surprisingly compact footprint these machines will fit in to areas with restricted floor space or areas not normally suited to the installation of large or bulky machinery.
Ease of operation
These machines are designed with clear access, simple controls and quick to adjust to size changes. The machines are operator friendly and allow for quick and easy size change, cleaning and maintenance to ensure minimal machine down time.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
621/625 Semi Automatic Pre-set Case Tapers
/in Sealer Tape Semi Automatic Pre-Set 110, 150, 200 400, 500, 600, 800, inf 100, 120, 150, 200 300, 400, 500 110, 150, 175, 560, N/A 150, 400, 460, 500, 510 10, 12, 14, 18, 20, 22, 25/by CBJamie

621/625 – Semi Automatic Pre-set Case Tapers The Endoline type 621 / 625 case sealers are semi automatic pre-set machines that seal cases with self-adhesive tape . They are well-suited to single operator control, sealing consistent size cases. The type 621 case sealer is bottom seal only and can be used with a 100 series case erector to form a manual erecting and sealing system. The 625 case sealers seals both top and bottom and can be used for long production runs of the same case size. Both these machines are very simple to operate and maintain. CASE DIMENSIONS The type 621 case sealer can handle cases between 110-990mm length and 100-500mm width, with no top taping. The type 625 case sealer can handle cases between 110-990mm length and 100-500mm and 110mm-510mm height. TAPE SIZE 50mm or 75mm. MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Compact Footprint
With a surprisingly compact footprint these machines will fit in to areas with restricted floor space or areas not normally suited to the installation of large or bulky machinery.
Ease of operation
These machines are designed with clear access, simple controls and quick to adjust to size changes. The machines are operator friendly and allow for quick and easy size change, cleaning and maintenance to ensure minimal machine down time.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
602/607 Fully Automatic Pre-set Case Taper
/in Sealer Tape Fully Automatic Pre-Set 150, 200 400, 500, 600 100, 120, 150, 200 300, 400, 500 110 150, 400, 460, 500, 510, 570, 750 10, 12, 14, 18, 20, 22, 25/by CBJamie

602/607 – Fully Automatic Pre-set Case Taper The Endoline type 602 and 607 are fully automatic pre-set case sealers that seals cases with self-adhesive tape and does not need an operator. It is well-suited to long runs of the same case size. CASE DIMENSIONS The type 602 case taper can handle cases between 150-400mm length, 100-300mm width and 110-370mm height. The type 607 case taper can handle cases between 150-600mm length, 110-500mm width and 110-560mm height. SPEED Up to 30 cases per minute. TAPE SIZE 50mm or 75mm. MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.
The type 602 and 607 offer high speed solutions and are both very simple to operate and maintain. Endoline’s unique four column construction provides added stability and its robust chassis enables the machine to run 24 hours a day, 7 days a week with minimal down time. The tape units are instantly removable and interchangeable.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Compact Footprint
With a surprisingly compact footprint these machines will fit in to areas with restricted floor space or areas not normally suited to the installation of large or bulky machinery.
Ease of operation
These machines are designed with clear access, simple controls and quick to adjust to size changes. The machines are operator friendly and allow for quick and easy size change, cleaning and maintenance to ensure minimal machine down time.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
247/248 Case Erectors
/in Erector Glue, Tape Fully Automatic Pre-Set 150, 200 400 100, 120, 150, 200 100, 120, 150, 200, 300 150, 175 150, 400 10, 12, 14, 18, 20, 22, 25, 30/by CBJamie

247/248 – Fully Automatic High Speed Case Erector The type 247 and type 248 case erectors are designed to handle smaller cases at a high speed using servo drives. These machines use its unique dual opposing vacuum feature to erect the cases and seal on the base with self-adhesive tape (247) or hot melt glue (248). The 247/248 is designed with high quality in mind and is extremely simple to operate and maintain to offer an excellent return on investment and low cost of ownership. CASE DIMENSIONS The standard type 247 and type 248 case erecting machines can handle cases between 160-400mm length, 100-300mm width and 150-400mm height. SPEED Up to 30 cases per minute. TAPE SIZE Up to 50mm wide as standard. MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Dual opposing vacuum opening
This unique design feature ensures that each case is opened positively from both sides. It ensures the efficient and reliable opening of cases, and overcomes problems that can be associated with stiff board and glue migration from the manufacturer’s joint.
High Speed
The 247/248 range is fitted with servo drives to further increase the number of cases sealed per minute up to 30 cases per minute.
Servo Drives
While allowing the machine to reach higher speeds – up to 30 cases per minute – the servo drive system permits greater flexibility and control by allowing almost instant acceleration and deceleration of cases through the erecting process. In turn this system can save energy because the servo drives only use power when needed.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
100 Series Case Erectors
/in Erector Glue, Tape Semi Automatic Pre-Set, Random 200 400, 500, 600 100, 120 300, 400, 500 N/A N/A 10/by CBJamie

100 Series – Semi Automatic Case Erectors Endoline’s range of semi-automatic case erectors offer an ideal first step to packaging automation. They are designed to reduce the time and effort taken to manually erect a case, at a low capital cost. The case erector will fold the lower flaps and hold the open case steady, in place, allowing packing to take place with both hands. This will increase productivity and reduce cost. Each semi-automatic case erector can be used either on its own or close coupled to a case sealer. The semi-automatic range of machines can also be set to an angled position which is ideal for products that are unstable such as bags or bottles. This allows for ergonomic packing of these product types and the machine incorporates a section of horizontal belt drive so the case is easy to feed into the case sealer. No set up or changeover is required on the case former offering complete flexibility. The former can be close coupled to a random case sealer offering a semi-automatic random case erecting and sealing solution. CASE DIMENSIONS The semi automatic case sealer range can handle cases between 200-600mm length and 120-500mm width. MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Compact footprint
With a surprisingly compact footprint these machines will fit in to areas with restricted floor space or areas not normally suited to the installation of large or bulky machinery.
Ease of operation
These machines are designed with clear access, simple controls and quick to adjust to size changes. The machines are operator friendly and allow for quick and easy size change, cleaning and maintenance to ensure minimal machine down time.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
227/228 Case Erectors
/in Erector Glue, Tape Fully Automatic Pre-Set 150 200, 400 100, 110, 150, 175 300 150, 175 150, 400 10, 12, 14, 18, 20, 22/by CBJamie

227/228 – Fully Automatic Case Erector The type 227 and type 228 case erectors are designed to handle smaller cases at a high speed. These machines use a unique dual opposing vacuum feature to erect the cases and seal on the base with self-adhesive tape (227) or hot melt glue (228). The 227/228 is designed with high quality in mind and is extremely simple to operate and maintain to offer an excellent return on investment and low cost of ownership. CASE DIMENSIONS The standard type 227 and type 228 case erecting machines can handle cases between 160-400mm length, 100-300mm width and 150-400mm height. SPEED The type 227 and type 228 case erectors have the ability to run at speeds of up to 22 cases per minute. TAPE SIZE Up to 50mm wide as standard. MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Dual opposing vacuum opening
This unique design feature ensures that each case is opened positively from both sides. It ensures the efficient and reliable opening of cases, and overcomes problems that can be associated with stiff board and glue migration from the manufacturer’s joint.
Compact Footprint
With a surprisingly compact footprint these machines will fit in to areas with restricted floor space or areas not normally suited to the installation of large or bulky machinery.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
Endoline Machinery
Endoline Automation specialise in the design, manufacture and installation of high quality end of line packaging machinery including Case Erectors, Case Packers & Case Sealers. For over 40 years Endoline’s business has developed from designing and manufacturing small case taping machines to its position today as a leading UK manufacturer and worldwide supplier of end-of-line packaging machines and systems.
FOLLOW US:
Latest News
Endoline Automation
Business Hours
Mon-Thurs:- 08:30 - 17:00
Friday:- 08:30 - 15:00
Endoline Machinery Ltd,
Stratton Business Park, London Road,Biggleswade, Bedfordshire, SG18 8QB
Email us : sales@endoline-automation.com
Call us now :+44 (0) 1767 316422