7048 Fully Automatic Random Case Sealer
/in Sealer Tape Fully Automatic Random 200 400, 500, 600 150, 200 300, 400, 500 110 150, 400, 460, 500, 510 10, 12, 14 /by CBJamie

7048 FULLY AUTOMATIC RANDOM CASE SEALER The Endoline type 7048 case sealer is a fully automatic random case taper that seals boxes with self-adhesive tape in random order and does not need an operator. It can seal small and large cases and adjusts automatically to the random sizes. The type 7048 is very simple to operate and maintain and it has been specially designed with a unique four column construction to provide added stability to run 24 hours a day, 7 days a week with minimal down time. CASE DIMENSIONS The type 7048 case sealing machines can handle cases between 200-650mm length, 200-500mm width and 110-480mm height. SPEED Up to 14 cases per minute dependant on case size. TAPE SIZE 38mm, 50mm, 75mm MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Random Case Sealing
This machine will automatically adjust its settings to close and seal cases throughout the full case size range in any random sequence. This machine can operate on small and large cases at speeds of up to 14 cases per minute.
Ease of operation
These machines are designed with clear access, simple controls and quick to adjust to size changes. The machines are operator friendly and allow for quick and easy size change, cleaning and maintenance to ensure minimal machine down time.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
205/208 Case Erector
/in Erector Tape Fully Automatic Pre-Set 200 400, 500 150, 200 300, 400 50, 100, 110, 150, 175 150, 400, 460, 500, 510, 570, 750 10 /by CBJamie

205/208 – Fully Automatic Case Erectors Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. CASE DIMENSIONS The standard type 211 case erector can handle cases between 200-500mm length, 150-400mm width and 175-600mm height. SPEED Up to 10 cases per minute as standard. TAPE SIZE Up to 50mm wide as standard. MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

Key Factors
Dual opposing vacuum opening
This unique design feature ensures that each case is opened positively from both sides. It ensures the efficient and reliable opening of cases, and overcomes problems that can be associated with stiff board and glue migration from the manufacturer’s joint.
Compact Footprint
With a surprisingly compact footprint these machines will fit in to areas with restricted floor space or areas not normally suited to the installation of large or bulky machinery.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
RELATED ITEMS
2218 Case Erector
/in Erector Glue, Tape Fully Automatic Pre-Set 200 400, 500 150, 200 300, 400 175 150, 400, 460, 500, 510, 570, 750 10, 12, 14, 18 /by CBJamie

2218 – Fully Automatic Case Erector The 2218 is a fully automatic case erecting machine which is designed to handle long cases in a wide variety of styles. The machine seals the bottom flaps with self-adhesive tape and offers a small footprint providing great value for money resulting in the machine being one of Endoline’s best-selling machine. CASE DIMENSIONS The standard type 2218 case erecting machine can handle cases between 200-650mm length, 150-400mm width and 175-600mm open height. SPEED Up to 12 cases per minute as standard, high speed – up to 14 cases per minute. TAPE SIZE 50mm wide as standard. 75mm wide optional. MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Dual opposing vacuum opening
This unique design feature ensures that each case is opened positively from both sides. It ensures the efficient and reliable opening of cases, and overcomes problems that can be associated with stiff board and glue migration from the manufacturer’s joint.
Compact Footprint
With a surprisingly compact footprint these machines will fit in to areas with restricted floor space or areas not normally suited to the installation of large or bulky machinery.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
251/253 Case Erector
/in Erector Tape Fully Automatic Pre-Set 200 400, 500, 600 200 300, 400 200 400, 460, 500, 510 10 /by CBJamie

251/253 – Fully Automatic Case Erector The type 251 and type 253 fully automatic case erecting machines have been designed to suit a wide variety of case sizes, styles and quality. The unique dual opposing vacuum case opening mechanism ensures that each case is positively opened from both sides, ensuring efficient and reliable opening of cases and overcomes problems associated with stiff board and glue migration from the manufacturers joint. The machines erect up to 10 cases per minute then seal the base with self-adhesive tape (251) or hot melt glue (253) for feeding into a case packer or a hand packing station. This case erector has been designed for customers where space is of a premium, as the machine is only 1 metre wide by 2 metres long. This offers customers a small footprint machine with the ability to integrate into a full inline packing system. CASE DIMENSIONS The standard type 251 and type 253 case erecting machines can handle cases between 200-600mm length, 200-400mm width and 200-500mm height. SPEED Up to 10 cases per minute as standard. TAPE SIZE Up to 50mm wide as standard. MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Dual opposing vacuum opening
This unique design feature ensures that each case is opened positively from both sides. It ensures the efficient and reliable opening of cases, and overcomes problems that can be associated with stiff board and glue migration from the manufacturer’s joint.
Compact Footprint
With a surprisingly compact footprint these machines will fit in to areas with restricted floor space or areas not normally suited to the installation of large or bulky machinery.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
613 Pre-set Fully Automatic Case Taper
/in Sealer Tape Fully Automatic Pre-Set 200 600 110 480 110 500 25 /by CBJamie

613 PRE-SET FULLY AUTOMATIC PRE-SET CASE SEALER The Endoline type 613 is an entry level fully automatic pre-set case sealer that seals cases with self-adhesive tape and does not need an operator. It is well-suited to long runs of the same case size and is of robust construction and is very simple to operate and maintain. The machine includes full interlocked guarding and a sensing kit for tape detection. Endoline’s solid construction provides added stability and its robust chassis enables the machine to run 24 hours a day, 7 days a week with minimal down time. The tape units are instantly removable and interchangeable. CASE DIMENSIONS The type 613 case taper can handle cases between 200-610mm length, 110-480mm width and 110-500mm height. TAPE SIZE 50mm. MACHINE FINISH Mild steel, powder coated white (RAL9010)

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Compact Footprint
With a surprisingly compact footprint these machines will fit in to areas with restricted floor space or areas not normally suited to the installation of large or bulky machinery.
Ease of operation
These machines are designed with clear access, simple controls and quick to adjust to size changes. The machines are operator friendly and allow for quick and easy size change, cleaning and maintenance to ensure minimal machine down time.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
744 Fully Automatic Random Case Sealer
/in Sealer Tape Fully Automatic Random 200 400, 500, 600 200 300, 400, 500 150 400, 460 10, 12, 14, 18, 20, 22, 25, 30 /by CBJamie

744 FULLY AUTOMATIC RANDOM CASE SEALER The Endoline type 744 is a servo driven fully automatic random case sealer that closes and seals boxes at high speed with self-adhesive tape and does not require an operator. It can seal small and large cases and adjusts automatically to random sizes. It is the dominant machine of its type in the market and has been installed with major snack and biscuit manufacturers around the world. The type 744 offers a high speed solution using barcode scanning technology to recognise the cases prior to sealing and is very simple to operate and maintain. It has a specially designed unique four column construction to provide added stability and its robust chassis enables the machine to run 24 hours a day, 7 days a week with minimal down time. CASE DIMENSIONS The type 744 case sealing machines can handle cases between 200-600mm length, 200-500mm width and 160-460mm height. SPEED 30 cases per minute across the full case size range in any random sequence. TAPE SIZE 38mm, 50mm, 75mm MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Random Case Sealing
This machine will automatically adjust its settings to close and seal 0201 cases throughout the full case size range in any random sequence. This machine can operate on small and large cases at speeds of 30 cases per minute across the full case size range in any random sequence.
Robust Construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Servo Drives
While allowing the machine to reach higher speeds – 30 cases per minute – the servo drive system permits greater flexibility and control by allowing almost instant acceleration and deceleration of cases through the closing and sealing process. In turn this system can save energy because the servo drives only use power when needed.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
734 Fully Automatic Random Case Sealer
/in Sealer Tape Fully Automatic Random 200 400, 500, 600 150, 200 300, 400, 500 110 150, 400, 460, 500, 570 10, 12, 14, 18, 20 /by CBJamie

734 FULLY AUTOMATIC RANDOM CASE SEALER The Endoline type 734 is a fully automatic random case sealer that automatically closes and seals cases with self-adhesive tape. It is the dominant machine of its type in the market and has been installed with major snack and biscuit manufacturers around the world. The type 734 offers a high speed solution using barcode scanning technology to recognise the cases prior to sealing and is very simple to operate and maintain. It has a specially designed unique four column construction to provide added stability and its robust chassis enables the machine to run 24 hours a day, 7 days a week with minimal down time. CASE DIMENSIONS The type 734 case sealing machine can handle cases between 200-460mm length, 160-500mm width, and 110-570mm height. SPEED Up to 20 cases per minute dependant on case size. TAPE SIZE 38mm, 50mm, 75mm MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Random Case Sealing
This machine will automatically adjust its settings to close and seal 0201 cases throughout the full case size range in any random sequence. This machine can operate on small and large cases at speeds of up to 20 cases per minute.
Ease of operation
These machines are designed with clear access, simple controls and quick to adjust to size changes. The machines are operator friendly and allow for quick and easy size change, cleaning and maintenance to ensure minimal machine down time.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
704 Fully Automatic Random Case Sealer
/in Sealer Tape Fully Automatic Random 200 400, 500, 600 150, 200 300, 400, 500 110 150, 400, 460, 500, 510 10, 12, 14 /by CBJamie

704 FULLY AUTOMATIC RANDOM CASE SEALER The Endoline type 704 case sealer is a fully automatic random case taper that seals boxes with self-adhesive tape in random order and does not need an operator. It can seal small and large cases and adjusts automatically to the random sizes. The type 704 is very simple to operate and maintain and it has been specially designed with a unique four column construction to provide added stability to run 24 hours a day, 7 days a week with minimal down time. CASE DIMENSIONS The type 704 case sealing machines can handle cases between 200-600mm length, 140-420mm or 170-480mm width and 110-480mm height. SPEED Up to 14 cases per minute dependant on case size. TAPE SIZE 38mm, 50mm, 75mm MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Random Case Sealing
This machine will automatically adjust its settings to close and seal 0201 cases throughout the full case size range in any random sequence. This machine can operate on small and large cases at speeds of up to 14 cases per minute.
Ease of operation
These machines are designed with clear access, simple controls and quick to adjust to size changes. The machines are operator friendly and allow for quick and easy size change, cleaning and maintenance to ensure minimal machine down time.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
702 Fully Automatic Pre-set Case Taper
/in Sealer Tape Fully Automatic Pre-Set 150, 200 400, 500, 600 120, 150, 200 300, 400, 500 110 150, 400, 460, 500, 510 10, 12, 14, 18, 20, 22, 25 /by CBJamie

702 FULLY AUTOMATIC PRE-SET CASE TAPER The Endoline type 702 is a fully automatic pre-set case sealer that seals cases with self-adhesive tape and does not require an operator. It is well-suited to long runs of the same case size and particularly for heavy cases such as those typically used in the produce industry. Endoline’s unique four column construction provides added stability and its robust chassis enables the machine to run 24 hours a day, 7 days a week with minimal down time. The tape units are instantly removable and interchangeable. CASE DIMENSIONS The type 702 case taper can handle cases between 150-600mm length, 130-490mm width and 110-510mm height. SPEED Up to 25 cases per minute as standard. TAPE SIZE 50mm or 75mm. MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Compact Footprint
With a surprisingly compact footprint these machines will fit in to areas with restricted floor space or areas not normally suited to the installation of large or bulky machinery.
Ease of operation
These machines are designed with clear access, simple controls and quick to adjust to size changes. The machines are operator friendly and allow for quick and easy size change, cleaning and maintenance to ensure minimal machine down time.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
400 Series Fully Automatic Case Gluers
/in Sealer Glue Fully Automatic Pre-Set 200 400, 500 120, 150, 200 300, 400, 500 100 150, 400, 460, 500, 510 10, 12, 14, 18, 20, 22, 25 /by CBJamie

400 SERIES FULLY AUTOMATIC CASE GLUERS The Endoline 400 series are fully automatic pre-set case sealers that seal cases with hot melt glue and do not need require an operator. It is well-suited to long production runs of the same case size and the range of machines offered include top gluing and top and bottom gluing. Endoline’s unique four column construction provides added stability and its robust chassis enables the machine to run 24 hours a day, 7 days a week with minimal down time. CASE DIMENSIONS The type 400 series case tapers can handle cases between 160-500mm length, 100-400mm width and 100-490mm height. SPEED Up to 30 cases per minute. GLUE SYSTEMS Endoline glue sealers use Nordson Pro-Blue glue systems as standard, offering high quality and efficency. Other glue systems are available on request. MACHINE FINISH Mild steel, powder coated white (RAL9010) or stainless steel.

BESPOKE OPTIONS
Any of Endoline’s machines can be modified or customise designed to suit your specification, if you can’t find exactly what you want then contact Endoline and a Sales Engineer will discuss your requirements with you in full.
Key Factors
Compact Footprint
With a surprisingly compact footprint these machines will fit in to areas with restricted floor space or areas not normally suited to the installation of large or bulky machinery.
Ease of operation
These machines are designed with clear access, simple controls and quick to adjust to size changes. The machines are operator friendly and allow for quick and easy size change, cleaning and maintenance to ensure minimal machine down time.
Robust construction
High quality components housed in a robust chassis ensure minimal servicing and enable 24 hour operation. These systems are designed for the rigours of typical end-of-line packaging environments.
Low Cost Of Ownership
The Endoline case erector machine range is designed to give you the best possible value for your investment through maximum productivity with minimal stoppage time. All Endoline’s machines are built for 24/7 operation and require little maintenance offering a long life expectancy resulting in a low cost of ownership.
Watch the video
*The video shown is for illustrative purposes only and may differ according to order specification.
Summary
RELATED ITEMS
Endoline Machinery
Endoline specialise in the design, manufacture and installation of high quality end of line packaging machinery. For over 30 years Endoline’s business has developed from designing and manufacturing small case taping machines to its position today as a leading UK manufacturer and worldwide supplier of end-of-line packaging machines and systems.
FOLLOW US:
Latest News
Endoline Automation
Business Hours
Mon-Thurs:- 08:30 - 17:00
Friday:- 08:30 - 15:00
Endoline Machinery Ltd,
Stratton Business Park, London Road,Biggleswade, Bedfordshire, SG18 8QB
Email us : sales@endoline-automation.com
Call us now :+44 (0) 1767 316422Privacy Overview
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.